How to check Hardware Configuration?

Bala · by Bala on Tue Dec 18, 2007 10:43 am

Description To check Hardware Configuration

#/usr/platform/`uname -i`/sbin/prtdiag

you sould get result like this:

#/usr/platform/`uname -i`/sbin/prtdiag
System Configuration: Sun Microsystems sun4u (2 X UltraSPARC-II 450MHz)
System clock frequency: 113 MHz
Memory size: 4096 Megabytes

========================= CPUs =========================

Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 1 1 450 4.0 US-II 10.0
0 2 2 450 4.0 US-II 10.0

========================= IO Cards =========================

Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ---------------------------- --------------------
0 PCI 33 On-Board network-SUNW,hme
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875

No failures found in System
===========================